If you have a small item to spray paint, then you can also try putting it inside of a box that has been placed on its side. Then, you can spray the paint into the box to spray paint the item and this will reduce the chances that paint will end up on nearby surfaces. You can also put items on a small piece of cardboard or a turntable inside of the box to make it easier to turn the item around as you paint.

Clean the surface of your item. Take a few minutes to wipe off any debris that might be clinging to the surface of the material you will be spray painting.

Just make sure to dry the surface completely before you paint it. If there is any sticky residue on the surface of your item, such as the remnants of a price tag sticker, scrape off the residue and then use a household cleaner to remove the rest. Part 2. Put on your protective gear. Before you begin painting, make sure to put on your respirator mask, safety glasses, and disposable gloves.

The safety goggles will help to protect you in case any of the paint blows back towards your face, and because spray paint is toxic, disposable gloves and a ventilator mask are necessary.

Put these on before you do any painting. Remember, your health and safety is always more important than your project. Apply primer first. Shake the can of primer for about three to four minutes before using it. Then, start spraying back and forth across the object you want to spray paint. Apply an even coating of primer to the entire object. Then, wait for the primer to dry completely. Check the primer can to find out how long it will take to dry. Applying primer before spray painting helps to ensure that your spray paint will have an even finish.

Otherwise, you may need several coats of spray paint to get even coverage. Shake the can well. Shake the paint can for about three to four minutes before you get started.

Do a spot test. Start by spraying your paint on an inconspicuous area of the item or on a scrap piece of wood or cardboard. This will give you an idea of how the paint will look when you spray paint your item.

It will also give you a chance to test which distance gives you the desired effect. Part 3. Apply one coat over your entire project. Make sure to slowly sweep the paint across the surface of your project from left to right to get an even coat. This will make it more likely that your paint will get smudged. Instead, apply multiple thin coats of paint to your project and let each coat dry completely before applying a new one.

Allow the first coat to dry completely. Most spray paints require a minimum of 24 hours drying time before you can apply a second coat. It is best to be patient and let the paint dry completely before applying any more paint. Apply a second coat. Although this might not always be necessary, applying a second coat will likely give you more even results. It will help to provide total coverage of your project and give you the brightest possible color. Let the second coat dry.

Allow 24 hours for the second coat of paint to dry. Clean up any tarps or newspapers and store any extra paint in a clean dry area. Apply a topcoat if desired. Most spray painted items do not require a topcoat unless they will be handled frequently. However, you can add a topcoat to any item that you spray paint.

Get a clear spray paint topcoat and apply a light layer over your spray painted item after it has dried completely. Then, let the topcoat dry for at least 24 hours and apply another coat if desired.

Wait for the last topcoat to dry completely before touching or moving the item. Keep in mind that applying a topcoat is optional. If you are happy with the finish on your item after applying the spray paint, then don't worry about applying a topcoat. Did you know you can get expert answers for this article? However, a paint sprayer will produce a thinner and more even coat when using a brush and roller. Therefore, the paint drying time will be shorter than using brushes and rollers.

In ideal temperatures, dry weather, and low humidity, it will only take you hours to dry a coat of paint. This period is much shorter than with other coating methods. However, before applying the next layer of paint, you should still check that the entire layer of paint is dry. Currently, many companies provide two-layer spray painting services at a reasonably low price. This is really hard to believe with high-quality and premium paints.

You need to know that two coats of paint will take a lot of money and time. You need to know that two coats of paint. Indeed a number of companies and their customers have confused double coats and spray-roll.

Spray painting and rewinding is a great painting technique for porous surfaces with a sprayer. This is how you use a paint sprayer and roller combination. This method does not take time to wait for the first coat to dry, but you can consecutively. The paint sprayer can create a perfect coating of paint on the material, but it cannot penetrate.

Using the roller to roll again will help the paint penetrate deeper. Thereby, it will help you have a solid and durable paint. However, you cannot call this a two coat method. You can only call it two coats when the first coat is dry and you proceed with the second coat on top of it. This is the fundamental confusion between different painting methods.

As explained above, double coat spray paint consists of two thin coats of paint in one overall coat. After the first coat of paint is completely dry, you can proceed to apply the next coat.

This is the main difference between these two methods. Spraying two coats of paint will take a lot more paint and time. If you use brushes and rollers, you must apply at least two coats of paint. In fact, you can do three to four coats of paint for the best finish. Since the brush and roller will not distribute the paint evenly like a paint sprayer, you are applying multiple coats as a certainty.

In fact, the money you spend on two coats of paint is well worth it. First, spraying two coats equates to losing two coats of paint. Using a paint sprayer also costs a lot more paint than using a brush. Second, it will take more time and effort to implement. And after sanding, be sure to use a tack cloth to remove any sanding dust before applying the next coat of primer or paint. Remember, the key to a smooth finished coat of spray paint is starting with a sanded-smooth, primed surface.

Then slowly rotate the turntable as you spray on the paint. Just be sure to keep the can at a consistent distance from the piece to avoid drips. To spray paint small fasteners, such as screws, nails, bolts, cup hooks and screw eyes, try this trick: Stick them into a sheet of cardboard. Stand the cardboard up—preferably outside—and then spray on the paint. Instead, spread out a large plastic or, better yet, canvas drop cloth. Before spray-painting the workpiece, shake the can until you hear the mixing ball inside bouncing around.

Then shake well for at least 90 seconds. Once you see the spray pattern, you can adjust your technique and determine how far away from the workpiece you must hold the can. Also, when spray-painting large or long items, start spraying an inch or so off the near edge of the piece, and continue spraying all the way across and off the far edge.

When you need a high-gloss coating that resists rust and chemicals, take a tip from the auto-body industry and step up to a 2K two-component spray paint.

I recently picked up from an old save, and after some initial confusion I got back into the dogfighting groove and remembered where I was Act 3, fighting my way to the other side of the core so I can rescue somebody from a prison… or something. I quickly hit some very tough battles, but I managed to win one or two another couple I lost after losing my beacon, which led me to reload. If I was overpowered in the system, I could just plow through the enemies and complete the objective i.

These battles have been great fun, and the challenge definitely encourages more creative play…. Am I maybe doing something wrong? SPAZ 2 early access trailer! Up for Early Access on May 19th. Any word on controller support? I found the mouse control in the first one the main barrier to enjoyment. The steam page shows full controller support. Post by spudcosmic » Mon Feb 10, am. Post by Starfire » Wed Feb 19, pm. Post by spudcosmic » Wed Feb 19, pm. Post by Starfire » Thu Feb 20, am. Post by spudcosmic » Thu Feb 20, pm.

Post by Starfire » Thu Feb 20, pm. Skip to content. Subset Games Home Quick links. Logout Register. Average Hull Mass, and Low Maneuverability. With an Overcharge Reactor. Thruster Engine. Because of its low Maneuverability the Gravity Missles will keep the enemy infront of you to fire your Fusion Beam, and allow the Leech beams to do their jobs.

Optionall you can replace the Leech Beams with 2 Medium Overload Emiters and use a Large Reactor Booster Module for to do slightly more damage, at the cost of using more energy. Average Hull Mass and Maneuverability. Highest Crew Capacity of its class.

Used by Bounty Hunters. Maximum Hull Mass, Low Maneuverability. Essentially the Advanced version of the Hydra, sacrificing movement for Durability and Power. Though compensation for its movement with 3 Turret Mounts allowing it to fire in any direction.

Take Extreme caution against a Brute, as it is almost always followed by 2 Cloaked Rangers, While their drones shed your shield, its Cannon Turret Mounts will destory your ship. I'm currently favouring a mix of Mass Drivers and Ion Emitters. With all medium rocket mounts converted into reactor booster modules, you can sustain concentrated fire for about 30 seconds. Even a drained reactor still gives you a pretty heavy damage output. How do I solve the Propaganda Mission?

General 1 Answer. Ask A Question. Browse More Questions. Keep me logged in on this device. Forgot your username or password? User Info: mongopikis mongopikis 10 years ago 1 I'm currently equipped with the all-slot Ion Cannon Hammerhead, which chewed through most enemies in Chapter 4 on rapidfire with no drain on the reactors, too!

The new enemieis, however, makes the lack of crowd control and the annoying tendency for the turrets to get locked on a target that's not what I want to bring down a real pain in the ass.. Are there any better choices? User Info: ranmafan ranmafan 10 years ago 2 I hear the Crawler with a full cannon complement is a potent weapon.

User Info: jcmason jcmason 10 years ago 4 You can also jump to the tactics screen F2 default and select all your ships and give them the correct target. User Info: Crimson Phantom Crimson Phantom 10 years ago 5 t5 I liked the sunsphere round ship with bombers and cannons t4 the multi ship 8 things in a V style all cannon t3 ship was for speed and cannons t2 ship was speed and cannons i7 k 4. User Info: kendrakirai kendrakirai 10 years ago 9 I like the Carrier. User Info: mongopikis mongopikis Topic Creator 10 years ago 10 Hmm, I went for a different defensive output with most points in Shielding, Engines and up to 6 in Hull.

Side Quest.

It may also make the foe flinch. Headbutt 70 15 30 The user attacks with its head. It may make the foe flinch. It restores HP sometimes, however. Mirror Move -- -- 20 -- Details The user counters the foe by mimicking the move last used by the foe.

Peck 35 35 -- Details The foe is jabbed with a sharply pointed beak or horn. Foresight -- -- 40 -- Details Enables the user to hit a Ghost type with any type of move. It also enables the user to hit an evasive foe.

Future Sight 80 90 15 -- Details Two turns after this move is used, the foe is attacked with a hunk of psychic energy. Substitute -- -- 10 -- Details The user makes a copy of itself using some of its HP. Psych Up -- -- 10 -- Details The user hypnotizes itself into copying any stat change made by the foe. Nasty Plot -- -- 20 -- Details The user stimulates its brain by thinking bad thoughts.

It sharply raises the user's Sp. Psycho Shift -- 90 10 -- Details Using its psychic power of suggestion, the user transfers its status problems to the target. Lucky Chant -- -- 30 -- Details The user chants an incantation toward the sky, preventing the foe from landing critical hits. Over that time, no one can fall asleep. Attack Sp. Hustle : Damage from physical attacks is 1. It is said to appear in front of kindly people to scatter a glowing down called "joy dust.

To share its happiness, it flies around the world seeking kind- hearted people. They say that it will appear before kindhearted, caring people and shower them with happiness.

It grows dispirited if it is not with kind people. The user scatters curious leaves that chase the foe. The user growls in an endearing way, making the foe less wary. The user charmingly stares at the foe, making it less wary. The user waggles a finger and stimulates the brain into randomly using nearly any move.

The user kisses the foe with a sweet, angelic cuteness that causes confusion. The user lets loose a huge yawn that lulls the foe into falling asleep on the next turn. The user compels the foe to keep using only the move it last used for three to seven turns. The user draws attention to itself, making all foes take aim only at the user.

A self-healing move. The user attacks with a prehistoric power. The user creates a protective field that prevents status problems for five turns. A reckless, life- risking tackle. This move can be used only after the user has used all the other moves it knows in the battle. The user focuses its mind before launching a punch. The user attacks the foe with a pulsing blast of water. A move that leaves the target badly poisoned. The user intensifies the sun for five turns, powering up Fire-type moves.

The foe is attacked with a powerful beam. A wondrous wall of light is put up to suppress damage from special attacks for five turns. It enables the user to evade all attacks. The user summons a heavy rain that falls for five turns, powering up Water- type moves. A full-power attack that grows more powerful the less the user likes its Trainer.

A two-turn attack. A full-power attack that grows more powerful the more the user likes its Trainer. The foe is hit by a strong telekinetic force. The user hurls a shadowy blob at the foe. The user attacks with tough fists, etc.

By moving rapidly, the user makes illusory copies of itself to raise its evasiveness. Yes, if you evolve the Togepi you get at the beginning of the game into a Togetic, and then buy a Shiny Stone from the PokeAthlon Dome and use it on it Your Togepi that Champion Cynthia gave you should evolve into Togetic should evolve at level Log in.

Pokemon HeartGold and SoulSilver. Study now. See Answer. Best Answer. Study guides. Q: When does togetic evolve in soulsilver?

Write your answer Related questions. Do any trainers in Pokemon SoulSilver have togetic? What level does togetic evolve in Pokemon soulsilver? When does Togepi evolve in SoulSilver? In Pokemon SoulSilver when does togetic evolve? They first appeared silhouetted in Gligar Glide.

The Egg that was born from them was passed on to Professor Elm for research, who then passed it on to Gold. The Egg eventually hatched into Togebo , a Togepi. They physically appeared in Capital Kabutops. Togetic's design appears to draw inspiration from a fairy , a baby bird , and an egg. Page actions Article Discussion View source History. Please remember to follow the manual of style and code of conduct at all times. For a specific instance of this species, see Togetic disambiguation.

Attack :. Defense :. Atk :. Def :. Speed :. For other sprites and images, please see Togetic images on the Bulbagarden Archives. Navigation menu Personal tools Create account Log in. This article is about the species. Images on the Bulbagarden Archives. Type Fairy. Abilities Hustle or Serene Grace. Super Luck Hidden Ability. Cacophony Hidden Ability. Gender ratio Unknown. Catch rate 75 Breeding Egg Groups Flying and Fairy. Hatch time - steps.

Height 2'00". Weight 7. Mega Stone [[ ]]. Base experience yield Gen. Leveling rate Fast. EV yield Total: 2. Base friendship Generation II. Gold They say that it will appear before kindhearted, caring people and shower them with happiness.

It grows dispirited if it is not with kind people. It can float in midair without moving its wings. Although it does not flap its wings very much, it can stay up in the air as it tags along after its trainer. They say that it will appear before kindhearted, caring people and shower them with happiness. Generation III. When it spots someone who is pure of heart, a Togetic appears and shares its happiness with that person.

Generation IV. This is the easiest way to learn the move. Togepi needs to like you to evolve into togetic. A soothe bell can help with this. To evolve togetic to togekiss, use a shiny stone on it Just fight with Togepi and give it a Nickname. Mine evolved at lvl. Plus, give it some expensive or rare items. Accepted Answer. Word games.

It can be a cooking bag, a glass bowl, or something like that. Apart from trapping heat, the transparent cover allows more sunlight to reach the cooking port and raise the cooking temperature.

This means you need to adjust the solar stove constantly. Solar stoves are perfect for people living off the grid. With the lack of a power grid, the only source of energy for people comes from renewables and fossil fuels. Solar panels are becoming cheaper every day, and their efficiency is increasing.

This is where solar cookers come in. They use the same energy source like solar panels, but much more efficiently for the given purpose of generating high heat. Solar cookers come in several different configurations and if you get a camp stove, you can carry it in a backpack or at least strap it to your rig.

A camp stove works the same just after the shower as it would on a bright sunny day. Second, you can save or the fire hazard that comes with cooking on an open flame.

Solar cookers are also popular among people who like to be prepared for whatever comes next, be it a massive blackout pulse from outer space or the zombie apocalypse.

Funny references aside, in emergencies such as state-wide power failures, storms, floods, and other extreme weather events, hot food can mean a lot. Finally, solar ovens benefit people who care about the environment and are always looking for ways to reduce their carbon footprint. Instead of using your gas stove or electric oven day after day, why wouldn't you all gather in the backyard, deploy your camp stove, and have quality time in fresh air while the sun cooks your dinner?

After all, you should keep in mind that apart from serving valuable resources, a solar oven can help you with your electricity bills. Solar cooking uses literally zero electrical power and contributes to zero emissions. Solar cooking is the cleanest and most environmentally friendly way of preparing food known today.

It uses only the power of the sun, while physics does all the rest. Its alternatives are much more inacceptable in the environmental sense.

For example, wood or coal stoves leave nasty byproducts like soot and ash, not to mention the CO2 and other residues that are dispersed into the atmosphere. Using a propane camp stove might be a bit greener, but natural gas is also considered a depletable resource that also needs a lot of energy to extract, refine, and transport.

Dragging fuel for a traditional stove or grill while camping really beats the idea of traveling light, not to mention self-sufficiency and living off the land. Thanks to their compact size and small weight, solar camp stoves are easy to pack and deploy wherever you need a hot meal. Unlike their counterparts that use wood or coal, solar cookers like GoSun Grill are perfect for situations where apart from available space, weight is luxury, as well.

If you can take one stove on a 30ft sailing boat for a day journey, would it be a solar stove or something else? The only thing you need is soapy water and a cloth to wipe any food or grease that might have stuck to the reflecting panels.

Since nothing is burned, you also don't have to deal with ash and embers that always pose a risk in the wooded areas where the ground is bristling with pine needles or dry leaves. Solar ovens cook food more slowly so it retains its flavor. For example, meat is more tender and nutritious compared to regular ovens. Because of the solar trap, these ovens are also great for retaining the moisture in your food.

And since the food cooks gently at temperatures lower than in regular ovens, it retains the nutrient and rarely overcooks or burns. At a regular oven, it's easy to adjust the temperature — just turn the knob and set the heat that you need. But did you know that you can easily adjust the temperature on a solar cooker as well? To raise the temperature, you only need to make sure your solar camp stove is oriented directly to the sun.

A great thing about solar ovens is that you need to prepare the ingredients and put them inside. No other prep work needed. What is more, since solar stoves don't burn any fuel, you don't have to worry about open flames or burns. Another benefit of solar cooking is that you don't have to monitor the food constantly.

Just put everything in and you can go about your business. Lastly, a solar oven is a valuable resource in areas that experience limited access to fuel and electrical power. More importantly, solar stoves are easy to build which makes them attractive for low-income communities that may have difficulties accessing fuel or electricity.

Each beneficiary spent four days building his cooker, everything was supervised by the instructors. In the fifth class, we taught them how to cook with it, and each family prepared their lunch using their own equipment. Now the village school also uses an ecological cooker to prepare meals for its 70 children.

Like all devices that run on solar power, solar ovens need sunlight to work. This makes them less useful during winters when days are shorter, and absolutely useless at nighttime. They are also not recommended for those living in cold climates, as the cold air can negate the heat accumulated by the reflectors. A solar oven might not be of much use during storms, while on overcast days only tube cookers can generate enough heat. Also, since the success of cooking depends on a lot of sunlight, some people might find it annoying having to constantly adjust and reorient the device.

Other users might be put off by the long cooking time when compared to a regular oven. With solar ovens, you need to prepare and start cooking your meal early in the morning. This can be inconvenient for people who have busy working schedules. Yes, solar power can run a stove. Solar camp stoves are designed to reflect available sunlight into a heat trap in the center of the oven, where you place the cooking dish.

Quality solar stoves can cook pretty much everything a regular stove can. Yes, solar ovens really work and can be successfully used for preparing a variety of meals and hot drinks.

They are especially popular among people living off the grid. Solar cookers depend on continuous sunlight supply to work, so they are completely useless after dark. Portable solar ovens that use vacuum tubes, can however work under cloudy skies and less-than-ideal sunlight conditions. JavaScript is disabled.

Please enable JavaScript to use the full functionality of the website. Automotives Car Accessories. This product may not be available anymore. Live Out of stock. Share: Report Embed. Top Products in Car Accessories more.

Login required. Rocket Stoves. New Financing Options available for purchase of Solar Cookers. How Solar Cooking Works. When to Solar Cook. Where You Can Solar Cook. Winter Solar Cooking. Emergency Preparedness. Frequently Asked Questions. Solar Cooking Videos. All of them attribute the increase to a number of factors, but say that the principal reasons would have to be: The recent downturn in our economy; causing people to look for alternative ways to save on resources and expenses.

Heightened awareness of emergency preparedness in the case of unforeseen and uncontrollable natural and man made events and the skyrocketing and volatile state of energy costs such as electricity, oil etc. Solar cooking may just be what you are looking for! Compare our prices to other sites on the internet and you will find that we are as low as, if not better than, the majority of sellers offering solar cookers. SunCook Solar Oven premium version. This Form cannot be submitted until the missing fields labelled below in red have been filled in.

Enjoy this page? Please share it with others. Here's how Would you prefer to share this page with others by linking to it? Click on the HTML link code below. The company works with six consultants, who serve as sales representatives, fabricators, installation technicians and one permanent sales agent, Halima. The Covid pandemic has not spared them.

Clients who had made bookings for the Solar cookers backed out due to lack of funds. He claims that things have been improving and business is going back to normal. In February , Athel technology partnered with the Kenya Climate Innovation Center to receive business development support. They are working on getting collaborations with real estate developers to have pre-built solar cookers installed in homes.

Robert also hopes that Kenyan Universities can embrace the technology. This would allow students to have a safe, affordable cooking solution that would reduce the electricity cost incurred by use of illegal electric coils. Their long term objective is to produce an eco-friendly, clean, reliable and efficient cooking solution for every household.

Follow me.

Today, snapback caps are on a resurgence that is going to keep them at the helm of hat fashion for a long time. Like it or hate it, snapbacks are going to be around longer as long as hip-hop culture is going to keep ruling entertainment circles. No debate about that. Fitted hats may have come into the fashion scenes way before the snapback. But they relaxed and the crown was taken from them and it is never coming back.

For that throwback feeling, fitted hats are still the undisputed options. But that is as far as it goes. You do not expect the young heads to put on an old school cap over their head and go to a club. Forget about it. Only old heads still trust the fitted caps. About popularity in the modern fashion space, snapbacks are more relevant and will outlive the fitted caps.

We could be wrong, but things look gloomy for a fitted hat resurgence ever happening in the future. Anything in your wardrobe can go with a snapback. Yes, try it now and you will be getting looks of admiration on the streets.

Of course, snapbacks are not the boldest fashion pieces, but they have a way to fit in all occasions. On the flip side, fitted caps are not so common in social scenes. They are a bit choosy about what you can pair them up with. Like if you had a Don C with just the very edge? I do believe that even snapbacks should come in maybe like, two sizes. Right, right, right. For guys that wear their hat backwards a lot, is there a preference? Like is it better to go with a fitted versus a snapback?

I think the adjustable's better, especially a Don 'cause you got your gold buckle and tab to stunt with. Right, right. It's almost like you're hiding the big python brim-- Or you're letting people behind you see it. Check my logo in the back. Alright guys, definitely let us know what you think about snapback or fitted in the comments section. The snapback also lets you do more with your hairstyle than the fitted hat because you have that extra space in the back. With a snapback, you can wear your hair down, in a low bun under the adjustment piece, or in a high bun or ponytail pulled through the opening in the back.

Unfortunately, the fitted cap makes it very hard to do anything but wear your hair down or in a low bun or ponytail. Their stretchable fabric fits snugly against the head for a more personalized feel.

The extra adjustment pieces in back are great for making sure the hat fits, but they can also deteriorate at a faster rate than the rest of the hat, which makes them a little less durable than a fitted cap. Both the fitted and snapback caps are incredibly popular with celebrities and influencers wearing both styles equally. Skip to primary navigation Skip to main content Snapback Vs. Fitted Caps — Which is Better? Who rocks this hat?

Rocking it, and rocking it well, have been megastars like Tupac and Michael Jordan. Of all street fashions, this is one of the most popular. This hat comes in many styles, sizes, and colors.

Some have curved, softbills, while others have bills that are flat. Different manufacturers and brands come up with different designs of varying levels of interest. But sports teams always have been, and still, remain the most popular choices. The back of this cap is its most distinguishable feature. As opposed to the snapback, described above, there is no adjustable back. These hats are designed to fit snugly on your head, which is why they are referred to as fitted.

Those who prefer this type of hat show them off proudly. They are worn backward by many fitted cap enthusiasts.

I was not actively looking for employment at that time. Two of the roles I discussed with RH resulted in interviews being scheduled, but ending in 2 very different ways.

The first company I was scheduled to interview with cancelled the interview without any reason per RH employees and RH had no idea WHY the interview had been cancelled. Their only comment was.. I had no further follow up from them about this position. The second company I interviewed with ultimately offered me the job and I relocated back to California specifically for that position. After securing a home in a VERY tough market competing with multiple others for the same home , I emailed the company who made the offer to me to let them know I was on track for my start date.

I did not get a response. I contacted RH to find out if they knew anything and they did not. Despite knowing the offer had been made AND accepted, they had not yet followed up with the company. Yet another week later, RH contacted me to say they were baffled as to what had happened and asked if I'd been in touch with the company about the position since the offer had been made and accepted.

I said NO, other than to let the company know I was on track with my move. At this point during the conversation, RH then admitted that they HAD been in touch with the company the day before, who told them the role had been put on "hold" until July. I have tried to also reach out to the company who made me the offer, but they have not responded.

But RH has disappeared with the wind. In all of my years, I have never experienced such unprofessionalism and a complete lack of empathy, not to mention the lack of a genuine desire to help FIND OUT what on Earth happened. I absolutely will not work with this company again. Based on the "Owner Responses" and non-responses to the other reviews, I doubt I will receive a professional courtesy of any kind as it relates to this review. I received a call from a Robert Half rep on a late Friday who works with their legal clients.

Once speaking with the female rep we went over my resume instead of telling me she would be briefing me on my interview skills. She came across as harsh and rude. Then she began to talk down like she was giving me the homegirl speech. I do know she was a recruiter in Atlanta covering the Charlotte North Carolina area. I have over 11 years of legal assistant background and 25 plus years of administration. Her overview was to take a customer service job.

Why would I work in a call center when my resume history shows something else. A month past and I spoke with a different recruiter and her demeanor was far more professional. I have 30 plus years of call center experience including medical customer support. Many years working remotely. I retired a couple of years ago and a friend told me RH was looking for remote customer service to help with Covid.

I contacted RH and discussed the position with them. I was asked if I could start right away I had to provide my own equipment They had me fill in all the forms including I9 and weeks later Get the same answer I have to ask.

I think they don't want to hire over 60 as others have stated. They wasted so much of my time I think I'm going to hold off working with a recruiter. I'm not really looking to leave my job, I just thought if I could find something closer to home that paid a significant increase, it would be worth looking into.

The point that I think resonated with me the most that a couple people mentioned is that if they need a recruiter to fill the position, it's probably garbage or the company sucks.

Great great point. This thread is very helpful. I have been contacted by 6 recruiters this past week on linked wanting to talk about special job opportunities. Since I only have internship experience thus far, I am assuming they view recent grads as the most gullible to their shady tactics.

I had a ton of interviews from staffing agencies. But as some have already mentioned, do not go to interview in their office because it is a waste of time. Yes at times, they do introduce you to jobs with high turnover rate because as long as they get you into the position, they will get commission. But I think it is up to you to review the company carefully before allowing them to submit your resume.

From my experience, some were awesome companies and some were ones with high turnover rates. I'm kind of in the same boat. I'm not actively looking right now, but I am casually perusing the ads to see what is out there. I'm working on getting my resume updated, and I'm planning on looking in the next couple of weeks.

I keep getting emails from various recruiters, but once I respond that I'm not actively looking and the jobs they are pitching me sound like my current job, I don't typically hear from them again. I work in public and plan to stay in public, but I want to go to a larger firm with a more specialized role. Right now, it's a small firm so I do a little bit of everything, but I really want to get away from audits and be able to focus on learning all I can about tax.

I have 4 years experience, so I am hoping that I have enough of whatever I need to be able to move up in the world. Looking to increase my salary and provide insurance for my family since my husband left his job last year to return to school.

From my experience, smaller recruiting firms are much better. I've worked with RH many times, and unfortunately that was at a lower staff accounting entry level type position, and because of that, I always got passed over and ignored in favor of the CPA's and people with much higher work experience that could get them way more money.

So I say look for the smaller recruiting firms, they tend to build relationships better and fight harder for their candidates. And I completely disagree with aaronmo regarding temp jobs. IF you have a full time position then yes, only accept a permanent position, but I'm thankful for a couple of the temp jobs I've gotten when times were rough and I just needed some sort of income. I moved away from my hometown for an internship at a larger firm when I was desperate, and even though the entire time they made it seem promising that I and the others would get full time offers, not a single intern did.

They just wanted cheap labor during busy season and they knew the only way to get us on board for it was by lying to us. During this internship, I met someone and we fell in love, but unfortunately her father was diagnosed with cancer exactly 10 years after he mother died of brain cancer, needless to say it was a hard time with her, and because this internship was going to end without an offer I told a couple people there about this situation, they literally told me I shouldn't talk about it and it's inappropriate to mention it , I was in jeopardy of having to go home because I couldn't afford living there.

Luckily, I found a small recruiting agency with great people, and they quickly found me a temp contract position which I needed that actually paid very well and that allowed me to be with my girlfriend now wife , and while there I met my now best friend. So I understand that for those with full time positions shouldn't accept temp positions from a recruiter, but sometimes, those temp positions are life changing and are a very great thing.

Sorry for the long post, I just wanted to post that as encouragement for those who are working with recruiter and may have hit hard times and might need temp labor. Some recruiters are fantastic people I know some! And you never know, temp labor could lead to a full time job.

I found my current job using a local recruiting firm and I have been in my job for 10 years. The woman in the position before me was being fired so my employer wanted to find a replacement before terminating her. Therefore, they used a recruiting firm to look for someone to fill the position. They couldn't advertise the job opening since the person didn't know they were being fired.

I was hired, they fired the person and I started day after they fired the other woman. So there are reasons why good companies may use recruiting agencies. I used RH years ago when I was trying to find employment after I moved to a new area with no job. Yes the jobs were temp but they were necessary until I found something permanent. So I feel RH does serve a purpose for those who may be unemployed and are seeking employment even if it is temporary.

I've used recruiters too…in fact, I worked for 7 years in a company that did a fair bit of staffing. With such an extensive network of potential candidates, they can fill many roles on an immediate basis. The company is also quite flexible, allowing you to hire employees for as little as one day or as long as you need.

Most businesses use the contact form on their website so a hiring manager can learn a bit more about their business and what it needs. The Robert Half website also offers a comprehensive candidate search function that allows companies to search their expansive candidate pool.

That way, you can create a shortlist of qualified candidates that make it even easier for Robert Half to match you with the ideal candidate for your position.

With over 70 years of experience in the staffing space, Robert Half has amassed quite a following with top companies. One of the major pros of working with a staffing agency is the flexibility it provides. Robert Half can also enable you to fill permanent positions without having to commit to the hiring process.

Hire a few bad employees, and those losses can add up very quickly. Even with entry-level positions, the cost of a bad hire can quickly run into the five-figure range. For small and mid-sized businesses, these types of losses can prove crippling to your business. In many cases, the standout members of your team are forced to pick up the slack and shoulder the weight of problem hires.

Before you know it, your top employees are burning out, and instead of needing to replace one problem employee, you have to restaff your whole team. When you allow Robert Half to staff your open positions, you eliminate virtually all the risks associated with hiring a full-time employee. Robert Half instead replaces that headache with a knowledgeable professional who can jump right into your project.

Another massive benefit of working with Robert Half is that they can quickly scale with your business. Staffing an entirely new team from Robert Half is just as easy as staffing a single employee.

With Robert Half, all employees are put through a rigorous screening process and technical proficiency exam. These standards ensure that your recruiter is only pulling from top-quality talent that can jump right into a productive role for your business. Considering the tumultuous business environment of , this is a huge plus. The company engages in global philanthropic, sustainability, and diversity efforts.

Robert Half also maintains a vast collection of educational materials and courses for their employees, and they have development programs that connect their strongest employees with growth opportunities.

As the most popular staffing agency in the world, Robert Half has its fair share of glowing reviews from actual clients. Others recommend Robert Half specifically for hard to fill IT roles, and for providing flexibility and well-vetted candidates that were perfect for the task at hand. There are a few things that the staffing giant could stand to improve.

While most companies come away with a wonderful experience after dealing with Robert Half, there are a few ways that the service could be better. This concern is exasperated by the nature of temp work. The best way to avoid this issue is to cultivate an inclusive workplace culture, where temp employees are treated as valuable members of the organization. Another issue with staffing agencies is that you have to cede a level of control to your recruiter.

It sounds like it may take some time for your recruiter to truly understand your needs. Robert Half has a proven track record of success thanks to their incredibly large pool of talented candidates. While their fees may be higher than competitors, the cost of using Robert Half is often lower than the competition because they make it easy to find the right candidate the first time. Meanwhile, hiring is difficult, and finding the perfect candidate takes a great deal of time and energy.

Robert Half allows businesses to outsource the hiring process so they can focus their energy on taking their business to the next level. While Robert Half is on the expensive side compared to other staffing agencies, they have a proven track record of excellence. I enjoy helping high-growth startups on their journey from idea to scale.

Table of Contents. Behance Review. Crowdspring Review. DesignBro Review. DesignCrowd Review. Designhill Review. Hatchwise Review. LogoMyWay Review. Logoworks Review. Squadhelp Review.

I don't see capacitor. Also, which is positive, the larger or smaller lead? And if it's not clear, I'm not an audiophile. Joined Apr 24, Is the impedance of the speaker marked on top? So filtering out anything below Hz or so assuming a 4 ohm speaker would be a 80 microfarad value. You must log in or register to reply here. Similar threads E. Stock GN tips. Replies 3 Views Oct 23, toofastforyou. Comp vs Replies 28 Views Monday at AM Buick Mark. Replies 9 Views Buy Alert! Replies 62 Views 1K.

Wednesday at PM Jerryl. These types of crossovers tend to offer only high and low pass filters, but due to the ability that it presents in regards to the fine-tuning, it tends to be more pricey than the passive crossover. The passive crossover is a little more mechanical than the electronic crossover because of its use of resistors, capacitors, and inductors to achieve the desired crossover to a speaker or group of speakers. The filters can be large, so they are usually best for smaller speakers, but if you would like to use it for a woofer, then you would need large and heavy inductors for the power needed.

Only low er frequencies would pass through the smaller filter. If you made it this far, you are in luck because the more intricate of the two is out the way! A bass blocker is exactly what it sounds like. This is useful for speakers that were not really meant to produce bass. It offers an improved quality sound when more bass is present in the tweeter and mid-range. With bass blockers, say goodbye to car-rattling headaches and say hello to a serene listening experience at any volume.

Hey there mobile audio lovers! Moreover, bass blockers are a cheaper alternative to external equalization devices. They are installed between the speaker and the receiver. Moreover, bass blockers are specifically designed to enhance the performance and power of tweeters and midrange speakers.

Most of them can handle the power of up to 50 watts. Finally, bass blockers can help protect your speakers from receiving any damage caused by low frequencies. Loudspeakers are essentially a system of mass-springs that vibrate each time the speaker receives electric current.

The performance of loudspeakers depends on what frequencies are coming in. Moreover, different speakers have different responses, and this is why you have different types of speakers in your car. Installing a bass blocker helps you unify the frequency response in your car speaker. Having a unified frequency response corrects three things:.

Cars that have a small speaker in the dash and a bigger speaker in the door are both on the front channels of the radio. The problem occurs if you want to add an amplifier or change your radio.

Both your bigger and smaller speaker would be getting the exact same signal. If they are both getting the same signal, your bigger speaker will be playing a lot more mid-bass. Consequently, your smaller speaker would be overcompensating, which can cause a distorted sound or can even destroy your speakers. In order to get maximum use out of your speakers, you would need to get bass blockers. Furthermore, bass blockers are a much less expensive alternative to equalization devices.

It covers both political thinkers from the past such as Plato and Marx and contemporary issues. International relations. International relations focuses on the relationships between countries and the theories that are used to explain these.

Comparative politics. At introductory level you will learn about how government and politics work in different parts of the world and how quantitative methods can be used to study this. British politics. Depending on the university, the focus may be more on understanding the UK's political system, or on recent UK political history. Your course may also include: simulation exercises, in which you and your coursemates will play the parts of different people engaged in a particular political process field trips to political institutions.

What careers can a politics degree lead to? Local government — for example, via the National Graduate Development Programme. A political party — for example working in fundraising, admin or campaigning, or as a research officer, which involves supporting policy-making work.

A trade union — for example as a research officer, which involves gathering, analysing and distributing information and data. Other careers for politics graduates If you decide against a politics-related career, there are plenty of other jobs to consider. Search for Related articles. Read more. Degree Explorer The Degree Explorer helps you plan for your future! The study of Politics allows us to understand, engage with and challenge systems of power as we see fit — and that is a goal that seems worthwhile from any standpoint.

Image credits: banner ; Marx ; EU ; protest ; politicians eating cake. Your email address will not be published. Save my name, email, and website in this browser for the next time I comment. Religious Studies degrees come in a variety of forms. They can include a comparative study of different religions around the world, targeted at students of…. Sociology is the study of society and human social behaviour: the wide range of things that govern our interactions with one another.

It addresses society…. Linguistics is the study of language from a scientific perspective: what language is, how it develops, how it is acquired, how it is structured, what…. Are you thinking of studying Politics? Articles Are you thinking of studying Politics? What kind of things can I expect to study? What do I need for a Politics degree? What skills will I acquire? Home Advice for students Choosing what to study Six reasons to study Politics Choosing what to study Six reasons to study Politics Politics is an interesting and fulfilling degree, but why should you study it and how can it help you?

Read through six of the best reasons to see if it's the right choice. Joe Wood 09 Nov Bookmark article. Ever-evolving subject The world of politics does not stand still, and neither does the teaching of it. Combined courses Politics departments usually offer a number of dual honours degrees so you have the option of combining a political education with another subject of interest. Study abroad Politics is a very international subject area; a variety of modules are available for those who want to study abroad.

Related articles. Sports Science degrees course guide Sports scientists are in high demand, as technology evolves and the need for athletes to Exam revision techniques Tried and tested exam revision techniques, such as mnemonics and revision cards, to help Is this page useful? Yes No. Sorry about that But a range of people who became famous in other fields also studied politics at university, from broadcaster Jerry Springer and fashion designer Miuccia Prada to singers Will Young and Pete Burns and comedians Miranda Hart and Harry Enfield.

Read more: Best universities for social science degrees. What is politics? Join the THE Student community and unlock free benefits. You may also like. Why study German? Student blogger Niamh McShane, studying German at Trinity College Dublin, defends her degree against the claim that it does not provide hard skills for the workplace. December 11 An essential guide if you are considering studying architecture at college. October 2 Why should you study maths at college, what jobs can you get, and how hard is it to get a place?

November 20

In fact, some employers don't even factor in GPA at all. We found that they don't predict anything. Still, many employers tend to regard a strong GPA as a sign that a candidate will be able to handle the pressure of a given role once hired — 67 percent of companies reported that they screen candidates based on GPA, according to a survey by the National Association of Colleges and Employers.

In recent years, organizations have increased their focus on other factors about a candidate, like internships and extracurricular activities, but GPAs can still play a role. While there's no clear-cut rule that dictates when to include your GPA, most career experts say to only keep it on a resume if it's over 3. Hey fellow Linguaholics! I am the proud owner of linguaholic. Languages have always been my passion and I have studied Linguistics, Computational Linguistics and Sinology at the University of Zurich.

It is my utmost pleasure to share with all of you guys what I know about languages and linguistics in general. Keep reading to find out how! Your GPA, which is short for Grade Point Average, is a number that evaluates how well you did during the entirety of your degree program. Average GPA is 2. Simply pick the one that is higher. The truth is that adding this component to your resume is optional. Because of that, it can be a little tricky to decide whether to include your GPA on resume or not.

In some cases yes, it can be a nice way of highlighting your good performance, however, in other cases it can actually harm your chances of getting a job. This goes without saying, but if an employer requests that you include a GPA in your resume, then you have to respect that no matter what score your GPA is. This is when your GPA can be regarded as an indicator of your performance. But remember, only if your GPA is higher than 3.

Try our resume builder. Create your resume now. Sample resume made with our builder— See more templates and create your resume here. The first point is pretty much self-explanatory.

If the employer asks you for your GPAs or transcripts, or test scores, etc. In fact, lying on a resume is never a good idea. When your professional experience is non-existent, your GPA could be seen as a kind of performance indicator by certain employers. Some of you may ask: Should I put a 3. Or Can you round up a GPA on a resume? If the recruiter sees a discrepancy between your resume and academic records, you'll have to explain it.

If for some reason your GPA has three decimal digits, simply truncate the last one. Pro Tip: There are certain occupations investment banking for one where your GPA is of paramount importance and listing it on your resume is required.

Listing a GPA on a resume is optional. The same survey shows that a GPA ranks 8 on a list of attributes that influence hiring decisions with a score of 3. As mentioned above, if your professional experience is tiny, your GPA is a kind of additional performance indicator.

Eventually, the boil comes to a head, meaning a yellow-white tip develops on top of the core. You may force the skin infection deeper and cause complications. In about 1 week, your boil will most likely start to change. The following scenarios are possible:. They can open your boil so that the core of pus can drain.

You should never open the boil yourself. The recommended way to properly and safely get the core out of a boil is by having it opened by a medical professional. Your procedure will take place in a sterile environment. The doctor will perform an incision and drainage by following the steps below:.

Antibiotics are often prescribed for boils on the face. These boils are more likely to cause an infection in your body. However, antibiotics may not always help clear up your boils.

This is because boils are walled off from your blood supply, making it difficult for the antibiotics to get in to work. The risk of the infection spreading to your bloodstream is too high. You can, however, try these safe home treatments:. It can take anywhere from 2—21 days for a boil to burst and drain on its own. However, if a boil becomes bigger, does not go away, or is accompanied by fever , increasing pain, or other symptoms, a person should see their doctor.

Boils are bacterial skin infections that cause red, pus-filled bumps to form around hair follicles or oil glands. Home treatments can help to alleviate symptoms and prevent the spread of infection. Treatment generally entails keeping the area clean, and applying warm compresses to encourage pus to drain from the core.

A person should never try to squeeze or burst a boil, as this can cause the infection to spread to other areas of the body. It may also result in scarring. If a boil is particularly big, persistent, or accompanied by other symptoms, a person should see their doctor.

In some cases, a doctor may carry out a procedure to drain the boil. This is an outpatient procedure requiring the use of local anesthetic. Carbuncles and furuncles are types of skin abscess. When a hair follicle becomes infected, it can fill with pus and swell, to form a painful, red bump.

Learn about what causes boils on the buttocks and how to treat them, including home remedies. We also look at identifying boils and when to see a…. Cysts and boils are both lumps that appear under the skin. Although the symptoms are similar, the causes and treatments are different. Learn more…. In about a week or maybe less, the boil may open on its own. When it does, wash the affected area with soap and water and dress with a sterile bandage.

You can also use an over-the-counter antiseptic preparation like Bacitracin, Neosporin, or Betadine if the wound is small. Keep using heat for the next few days to promote draining, washing the area twice daily and applying a fresh bandage every time. If the boil fails to open on its own, don't get frustrated and try to "pop" it. Squeezing only forces the infection deeper into your skin. Make an appointment to have it drained in a sterile environment.

If you have a boil and experience any complications, including fever or a worsening of symptoms, see your healthcare provider immediately or visit your nearest emergency room. Boils are typically bacterial infections. Putting pressure on one to make it burst can push the infection deeper into the skin. Instead, for small boils, use warm compresses to draw the infection out and let it drain on its own. Then treat the open wound with antibacterial medication. Large boils should be drained by a healthcare provider to prevent complications.

If recurrent boils are a problem, your healthcare provider might prescribe antibiotics. You may also be advised to use a nasal cream that prevents bacteria from spreading from your nasal cavities to the area. Pus , known by the medical term purulent exudate, comes out of a boil. This fluid may be white and yellow but can also look brownish or green.

Pus is a sign that the body is fighting an infection. Sign up for our Health Tip of the Day newsletter, and receive daily tips that will help you live your healthiest life.

Boils and carbuncles: How are boils treated? Ahmad H, Siddiqui SS. If the boil bursts, a person should dress the wound in a sterile bandage to prevent dirt from getting inside. It is also a good idea to:. Doctors recommend applying a warm antiseptic compress to a boil when it first appears.

The AAD suggest:. Some people may find it easier to hold the compress in place using a bandage. People can use a warm compress 3—4 times daily until the boil naturally bursts and drains. A drawing salve can also speed the healing of a boil. Drawing salves are medicated ointments that help draw bacteria and pus out of an abscess. They usually contain ammonium bituminosulfonate, or Ichthyol, as their active ingredient. Over-the-counter OTC pain medications, such as ibuprofen or acetaminophen, can reduce the symptoms of a boil.

They may help with pain and swelling. Follow the instructions on the label and speak to a pharmacist before giving medications to children or people with underlying conditions. People with severe boils may need to avoid moving the affected area entirely until it heals.

This is because movement can put pressure on the boil and increase the risk of the infection getting into the bloodstream. If someone has a boil on the face, they may have to avoid talking, making unnecessary facial expressions, and chewing. Drinking liquids or eating mushy food can help with this. In some cases, a person may need bed rest. How long a boil takes to heal depends on several factors, such as how severe, large, or deep it is. According to the AAD, it typically takes between 1—3 weeks for boils to burst and drain on their own.

Some experts state that many boils heal within 10 days. The AAD suggest that a person should also see a doctor as soon as possible if:. A person must also see a doctor if they are at risk for complications. This includes people who have a boil on the face, who have reoccurring boils, or who have underlying conditions that weaken the immune system.

Agreeing with otterly2k. The mandolin has big advantages in playing melodies, including the fact that for hundreds of years the violin had more music written for it than any other instrument. But as far as accompanying yourself or others singing, the guitar is such a treat that it makes learning the basic chords, quickly rewarding. It's the time you want to put in that makes the learning period seem short and easy.

I'm learning both right now, with about a two year head start on mandolin. I'd tried to learn guitar a few times but was never able to match the progress that I had on mandolin. Ironically, with some mandolin under my belt, it feels like guitar is actually easier. I can fake a lot more on guitar without requiring the speed and dexterity of mandolin.

The ability to play guitar fingerstyle also gives me more options. The mandolin is still my first love, though. At first glance at this it looks like they oppose each other notewise one goes high, one goes low but I suppose somewhere that is supposed to make sense.

Opinions on both sides. Having played guitar for a while, I found mandolin to be very natural. As always, of course, motivation plays a hugh part. Personally I find the guitar easier. I started on with the mandolin and then after a year started leaning guitar. Maybe it is because I had already learned some stuff and my fingers were starting to get used to the whole chord forming thing.

But the more theory I learn, the easier both instruments become, since theory transposes instruments. Like somebody else also said, I personally find the mandolin easier for melody and the guitar easier for chords I've never owned, played, heard knowingly or even seen a Johnson so I can't comment on your second question, except this: Be content with what you have because any mandolin is better than none and when you feel you've made some progress and saved some more money , get a better one.

A good instrument is usually easier to play than a rank beginner's cheap instrument but then, you must cut your coat according to your cloth Ps welcome to the site! Three days after I bought my first mandolin I had a band, a gig and an instrumental I wrote on mando to perform For me, music started to make sense only when I discovered the tuning and shorter scale length of the mandolin.

To this day, for me the mandolin is more logical and much more comfortable than the guitar. I started out on a ebay Johnson four years ago and played it for about 8 months before upgrading to a MK Legacy that plays like butter and opened-up to sound great now The Johnson needed major set-up as the action was WAY too high and required a superhuman vise-like grip for a newbie to play.

Once that was done I had a fairly loud mando with alright tone and action for something so cheap. The MK was like a breath of fresh air after it though, my playing improved rapidly upon switching just because I played the MK so much more due to the comfort and lack of fatigue. I remember lengthy discussions about bass guitar being easier "cause it only has four strings". The lower four courses on the instrument are tuned in pairs with one string each; this creates an octave effect like that of a string guitar.

Mandolins also often feature more ornate carvings than most guitars do. Mandolins also have a shorter neck than most guitars, which can make them easier for some players to play because the frets are closer together although many people find it harder to fret notes at the end of the fingerboard.

There has been a lot of changes in the number of strings a guitar has, where earlier guitars had 4 courses like a mandolin, but today we have guitars having six single strings instead of courses.

Apart from a bass guitar, typical guitars have six single strings while a mandolin has 8 strings paired to 4 courses. Most beginners fear mandolins because the double strings are challenging to make a note. The good thing with mandolins strings is that they are thinner just close to one guitar string, and also their nearness to each other makes them feel like one.

The mandolin strings are fixed tight with lager tension as compared to guitar strings. This makes beginners feel the fingers kind of hurting until, and to make the matte worse, strings are also thin, so imagine the pressure on the fingertips. Hence guitars are best for first-time players. Both bass or standard guitars are larger than a mandolin virtually in every way. It is impossible to reach every fret on a mandolin due to their smaller size, and you wonder why the designer added them all.

Guitars are tuned differently from a mandolin. Meanwhile, we can say that the chord structure of a guitar is more complex than a mandolin and banjo. The reason for this is the number of strings that a guitar has. The more the strings, the more chords that you need to learn. Therefore, you might spend a lot of time to learn the chords before the actual playing techniques. Once you can master playing rhythms, you will be able to take lead roles as well.

Moreover, you also also learn the different techniques on playing a guitar. Strumming is just the basic.

Later on, you will encounter the complexities of plucking, string-bending and so forth. Of course, these are learnable skills once your hands are already accustomed to the rhythm.

If that day comes, you might be able to follow the tracks of Eric Clapton or Tony Rice. It is not a far-fetched dream anyway. Just learn the scales on the fingerboard, and you are already on your way. Mandolins come in different varieties, too. Each region of the world has unique versions for this instrument. Most of the time, people use it to play jazz, classical, and bluegrass genre.

Sometimes, you can hear it on Irish and Celtic songs. The mandolin is relatively smaller than a guitar. But do not let its size be the reason you underestimate this instrument.

Being small doesn't mean that it is easy to learn and play. In fact, it is quite opposite. Specifically, the mandolin comes with left-hand and right-hand techniques. You need to master each of the technicalities before you are able to play the mandolin properly. Fortunately, if you are familiar with stringed instruments, it won't be a problem to your part.

After all, hand techniques are common to guitar and banjo as well. When you study the mandolin, you will also encounter the terms "cross-picking," "chops," and "tremolo. One of the common issues is the playing technique. Basically, it will help if you learn both left- and right-hand techniques when playing the mandolin. Be prepared for specific ways of playing necessary to master this instrument, including:.

One more struggle is to get used to playing double strings. It is not simple to adjust your fingers to hold double strings, especially if you have already played some other string instrument. On the other hand, you need to clench large hands to get the right notes while playing. In the end, the mandolin has a short neck. Consequently, its strings have much more tension, so you may feel resistance while pushing the mandolin strings down.

As a result, you will face sore fingers during the first few lessons. There are no too many differences when it comes to the learning process. Moreover, mastering one instrument will make it easier to play another in the future.

However, you will probably have difficulties finding adequate learning resources available for the mandolin classes. There are fewer tutors available, and literature is a bit limited. All that will make learning mandolin complicated. The way of guitar construction makes it much more convenient to maintain than the mandolin. The fixed guitar bridge that supports the strings allows their replacing effortless, so even a novice can do it. On the other hand, the floating mandolin bridge can move or even fall while removing and changing the strings.

In such a case, you need to put them back in the right place. It is vital since the too high or too low placed bridge will result in inadequate sound. It can be a bit terrifying for a beginner.

Many people have at least one of these appliances at home. To grind flax seeds with a blender, add 1 cup grams of flax seeds to the device and blend for a few minutes, or until the flax is ground to your desired consistency. With a food processor, add at least 1 cup grams of flax seeds and grind until they reach your desired consistency. This may take several minutes. However, using a blender or food processor is time-consuming, and you have to grind large amounts at once.

Other methods allow you to grind small batches. Flax seeds can be ground using a blender or food processor, but you have to grind in batches of at least 1 cup grams at a time.

Using a coffee grinder is the easiest, most convenient way to grind flax seeds. To grind flax seeds in this way, add whole seeds up to the fill level of a coffee grinder that you specifically use for flax seeds and power it on. It should only take a few seconds for the seeds to be fully ground. Additionally, using a coffee grinder allows you to only grind the amount you need — helping to limit waste.

One is a flax mill, which is a specialized kitchen tool made solely for grinding flax by hand. It looks like a pepper grinder. In fact, you can even use a pepper grinder to grind flax seeds once it has been emptied and cleaned so that no pepper residue remains. Finally, you can use a mortar and pestle to grind flax seeds by hand. Use the pestle the club-shaped object to crush the flax seeds against the mortar the bowl to grind them.

These options allow you to grind up to 1 tablespoon of flax seeds at a time. No matter which grinding method you choose, ground flax seeds can be stored in an airtight container in the refrigerator for up to 1 week 4.

Ground flax seeds should taste earthy and slightly nutty. Flax seeds are rich in healthy fats, antioxidants, fiber , and protein. Still, a blender, food processor, pepper grinder, flax mill, or mortar and pestle can also accomplish the task.

The team suggested that dietary flaxseed may be useful for lowering cholesterol levels. Some scientists have also linked omega-3 oils, which are usually present in oily fish, to reductions in cardiovascular risk. Researchers have suggested that flaxseed could offer an alternative to marine sources of omega 3. This could make it a useful resource for people who follow a plant-based diet. Learn more about soluble and insoluble fiber here.

According to the Arthritis Foundation , flaxseed may help reduce joint pain and stiffness. They add that there is a lack of evidence to support its use for this purpose, but they say that the ALA in flaxseed may help reduce inflammation.

What is the anti-inflammatory diet? In , a team of scientists published results suggesting that flaxseed may help reduce the incidence or severity of hot flashes in women not using estrogen therapy during menopause. In , however, further research by the same team concluded that flaxseed did not, in fact, make any difference. Lignans and other phytoestrogens may help reduce the risk of chronic conditions such as diabetes.

In , scientists gave 25 people 0 g, 13 g, or 26 g of flaxseed every day for 12 weeks. The participants had prediabetes and were either males with obesity or overweight or females who had undergone menopause. The 13 g dosage appeared to lower glucose and insulin levels and improve insulin sensitivity, but the other dosages did not have this effect.

Also, a rodent study suggested that the compounds in flaxseed may help reduce the incidence of type 1 diabetes and delay the onset of type 2 diabetes. These results may not be applicable to humans, however. The same year, 99 people with prediabetes took 40 g or 20 g of flaxseed or no flaxseed and no placebo each day for 12 weeks. Consuming flaxseed appeared to reduce blood pressure , but it did not improve blood sugar levels or insulin resistance.

Which foods can lower blood sugar? Flaxseed is a good source of insoluble fiber, which does not dissolve in water, instead remaining in the digestive tract after eating.

There, it absorbs water and adds bulk, which may help promote regularity. The NCCIH add that consuming flaxseed with too little water can worsen constipation and may lead to an intestinal blockage. Also, too much flaxseed or flaxseed oil can cause diarrhea. Which foods can help relieve constipation? Learn more here. In , scientists found evidence to suggest that dietary lignans from flaxseed helped mice recover from radiation exposure.

The mice that consumed lignans had lower levels of inflammation, injury, oxidative damage, and fibrosis, as well as a better survival rate, compared with those that did not.

If further tests in humans show similar results, lignans from flaxseed could help treat lung issues following exposure to radiation or radiation therapy. The NCCIH are currently funding studies to find out whether or not the nutrients in flaxseed can help with:. Uses of flaxseed in Ayurvedic medicine include :. According to the United States Department of Agriculture, a tablespoon of ground flaxseed weighing 7 g contains:. A teaspoon of flaxseed also contains traces of various vitamins and minerals, but not in significant quantities.

It also provides lignans, tryptophan, lysine, tyrosine, and valine, as well as healthful fats, which are mostly unsaturated. Today flax is used as an additive in a wide variety of products such as paint and biodegradable linoleum, or used on its own as a nutritional food item, or even processed into fabric.

The diversity of the flax plant is unmistakable. Canada is currently one of the world leaders in flax production and trade. What Are the Benefits of Flax? How Much Should I Consume? The Different Types of Flax Many people question whether to buy organic or non-organic flaxseeds.

Experiment with Flax…How to incorporate it Into the Diet Add 1 tbsp of ground flax seed to your cereal, yogurt, applesauce, casseroles, pasta, or soup.

Add ground flax seeds to home-baked goods, such as muffins, cakes, cookies, or breads. Use for salad dressings, marinades, and on potatoes or vegetables. Go to Top.